Allen 2021-10-02 12:20:39 7036 0 0 0 0

CentOS 7.0默认使用的是firewall作为防火墙, 使用systemctl来管理服务和程序,包括了service和chkconfig

1、查看默认防火墙状态(关闭后显示not running,开启后显示running)
[root@localhost ~]# systemctl list-unit-files|grep firewalld.service
firewalld.service                             disabled
或者:
[root@localhost ~]# systemctl status firewalld.service
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)                 --表示防火墙已经关闭
  Docs: man:firewalld(1)

2、检查防火墙的状态
[root@localhost ~]# systemctl list-unit-files|grep firewalld.service
firewalld.service                             disabled
或者:
[root@localhost ~]# systemctl status firewalld.service
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)                 --表示防火墙已经关闭
  Docs: man:firewalld(1)

3、开启防火墙
[root@localhost ~]#systemctl start firewalld.service       --启动firewall
[root@localhost ~]# systemctl enable firewalld.service     --开机时启动firewall
Created symlink from /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service to /usr/lib/systemd/system/firewalld.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/firewalld.service to /usr/lib/systemd/system/firewalld.service. 

4、关闭防火墙:
[root@localhost ~]#systemctl stop firewalld.service            --停止firewall
[root@localhost ~]# systemctl disable firewalld.service        --禁止firewall开机启动
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.

5、重启防火墙
[root@localhost ~]# systemctl restart firewalld.service
6、查看防火墙是否开机自启
[root@localhost ~]# systemctl is-enabled firewalld.service;echo $?
enabled             --自启
0
或者:
[root@localhost ~]# systemctl is-enabled firewalld.service;echo $?
disabled                --不自启
1

7、查看已启动的服务列表
[root@localhost ~]# systemctl list-unit-files|grep enabled
auditd.service                                      enabled 
[email protected]                                     enabled 
avahi-daemon.service                                enabled 
crond.service                                       enabled 

8、开启端口
[root@localhost ~]# firewall-cmd --zone=public --add-port=80/tcp --permanent
success
命令含义:
–zone #作用域
–add-port=80/tcp #添加端口,格式为:端口/通讯协议
–permanent #永久生效,没有此参数重启后失效

9、查看已经开放的端口
[root@localhost ~]# firewall-cmd --list-port
80/tcp

10、屏蔽FirewallD服务
[root@localhost ~]#systemctl mask firewalld
还可以通过创建一个firewall.service到/dev/null的符号连接来屏蔽防火墙服务。

11、反屏蔽FirewallD服务
[root@localhost ~]#systemctl unmask firewalld
这是反屏蔽FirewallD服务,它会移除屏蔽FirewallD服务时创建的符号链接,故能重新启用服务。

12、检查是否已安装防火墙
[root@localhost ~]#yum install firewalld firewall-config


下面说下CentOS7和6的默认防火墙的区别

CentOS 7默认使用的是firewall作为防火墙,使用iptables必须重新设置一下

1、直接关闭防火墙
systemctl stop firewalld.service #停止firewall
systemctl disable firewalld.service #禁止firewall开机启动

2、设置 iptables service
yum -y install iptables-services

3、如果要修改防火墙配置,如增加防火墙端口3306
vi /etc/sysconfig/iptables 
增加规则
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
保存退出后
systemctl restart iptables.service #重启防火墙使配置生效
systemctl enable iptables.service #设置防火墙开机启动

4、最后重启系统使设置生效即可
systemctl start iptables.service #打开防火墙
systemctl stop iptables.service #关闭防火墙

【版權聲明】
本文爲轉帖,原文鏈接如下,如有侵權,請聯繫我們,我們會及時刪除
原文鏈接:https://blog.csdn.net/cool_summer_moon/article/details/78744009
Tag: 防火墙 Centos7 Centos
我也要發一個   ·   返回首頁   ·   返回[Linux]   ·   前一個   ·   下一個
歡迎評論
未登錄,
請先 [ 註冊 ] or [ 登錄 ]
(一分鍾即可完成註冊!)
返回首頁     ·   返回[Linux]   ·   返回頂部